MANUAL CODE: XXXXX
PROFESSIONAL SOUS COOKER
ISSUE DATE: 15/01/2018 vers_00_05
Rev. 00.00 WITH REFERENCE TO FIRMWARE VERSION :00_15 and more
ELE
GEN
by Quaglia Luigi - Via Jmre Nagy 8-8/A 42019 - Scandiano Reggio Emilia Italy- VAT No. 02018620357
TEL.+390522859721 – FAX +390522767677 -
VOIP Skype. eleg2002
- Web-www.elegen.it - email
Page 16 of 16
In cases where the customer have no possibility to send the email or fax, need to call the repairing center and establish with him the
solution, if accept the repairing need to pay in advance, before that the repairing is startedif there isn't any answer from the
customer, the repairing center suspend the reparation and hold the product for maximum 6 month, after this time the product can
be demolished without prior notice to the customer, in this case the customer lost his propriety on the good and nothing can be
claim from the repairing center.
12.11-
The repairing cost are always VAT, tax and shipping cost not included.
12.12-
The costs of the unrepaired machine and, shipping costs regards the unrepaired machine are always on customer charge
12.13
- In the cases where the costs of repairing are very high and not convenient the producer is commited to offer the new product
at the best price as possible
12.14
– In the cases where is impossible to repair the machine because same spare parts are obsolete or , because the producer of
this part is failed or closed, nothing can be claim to the producer of the machine, the producer is not obligate to refund the
customer.
13.0 IF THE MACHINE DOES NOT WORK
If the machine does not switch on :
1)
check that the plug has been connected to the mains.
2)
check that the plug has been thoroughly inserted into the socket.
3)
check that the voltage, current and frequency of the mains are consistent with data contained on the machine plates
4)
make sure the switch located on the back of the machine is on
5)
Verify that the machine is not in Standby mode; if it is, press one button to wake up the machine
6)
make sure the fuses are intact and check if the magneto-thermal switch installed on the main power supply is on.
If it does not warming up :
1)
verify that the parameters are correctly set.
The machine does not perform the required work cycle:
1)
Verify that you have started the work cycle by pressing the Start key
2)
Check that the preheating cycle is not activated
3)
Check that there is not a too high set working temperature on an uninsulated tank.
4)
Check that you have inserted the core probe correctly when cooking with a core probe,
If after carrying out the checks above, the machine still doesn
’
t work properly, contact the nearest technical support service or the
manufacturer.
Technical changes and copy right:
The manufacturer reserves the right to change this publication without being obliged to notify any third parties.
This manual is for the exclusive use of the purchaser of the product and of his associates and cannot be transferred to third
parties.
This manual is protected by International copyright laws and its unauthorised reproduction is expressly prohibited and punishable
by law.
References:
In the various paragraphs there are various references to Sous Cooker, it is understood that the references are valid for all the
models shown in the head of page. 1.
ELEGEN BY QUAGLIA LUIGI
VIA JMRE NAGY 8 42019 SCANDIANO
(REGGIO EMILIA) ITALY- VAT NO. 02018620357
TEL. 0039.0522.859721 FAX 0039.0522.767677
