Electrostatic Technology 18028, Руководство пользователя

Страница: 55 / 67

Electrostatic Technology, Inc. Trickle Impregnation System
Serial #18028 51
15.2 BAD PART (continued)
BAD PART - SYMPTOM POSSIBLE CAUSE(S) REMEDY(S)
Low part temperature entering
Trickle area
Turn Induction Heater setting up.
Cure Tunnel temperature set too
low Turn Cure Tunnel temperature
setting up.
Resin not cured
Resin mixed incorrectly Correctly remix a new batch of
resin.
Mis-aligned Nozzles Re-align Nozzles (move photo
eye).
Resin on O.D. of part
Resin flow rate too high Lower resin flow rate.