Electrostatic Technology 18028, Руководство пользователя

Страница: 20 / 67

Electrostatic Technology, Inc Trickle Impregnation System
16 Serial #18028
6.8 DISTILLED WATER SYSTEM
The water that flows through the coils of the Induction Heaters is contained in a
closed loop system. This system should be filled with about 10 gallons of distilled
water.
6.9 INDUCTION HEATER COOLING WATER
Heat in the distilled water system is removed by customer-supplied cooling water
fed to one path through a heat exchanger as the distilled water flows through the
other path in the heat exchanger.
Locate the view hole in the front panel of the machine, at the Cure Module. This
view hole has a label marked "Distilled Water Level". A distilled water temperature
gauge is located on the sight gauge. The normal water temperature is 60
°
- 90
°
F.
The water level can be checked by looking at the "HIGH/LOW" marking on the
sight gauge.
6.10 MAIN CONTROL CABINET
The Main Control Cabinet for the Trickle Impregnation System houses the machine
electrical circuitry. Refer to the Electrical Schematics in the Appendix.
Mounted above the Main Control Cabinet is the Operator Main Control Panel. All
the operator controls for equipment operation are located on this Operator Main
Control Panel.