Electrostatic Technology 18028, Руководство пользователя

Страница: 32 / 67

Electrostatic Technology, Inc Trickle Impregnation System
28 Serial #18028
8.4 MACHINE – MANUAL CONTROL & SETUP SCREEN
The MACHINE - MANUAL CONTROL & SETUP SCREEN includes the following
screen buttons along with selections to access different screens and silence the
audible alarm:
CONVEYOR START
Screen Pushbutton
Starts the Conveyor in manual mode.
CONVEYOR STOP
Screen Pushbutton
Stops the Conveyor in manual mode.
RAISE POWER
Screen Pushbutton
Increases the output power of the Induction
Heater.
LOWER POWER
Screen Pushbutton
Decreases the output power of the Induction
Heater.
PROCESS
Screen Message
Displays oven Temperature.
SELECT RUN MODE
Screen Pushbutton
Places the Trickle Slide Station in Run Mode
(Normal Operation).
SELECT TEST MODE
Screen Pushbutton
Places the Trickle Slide Station in Test
Mode.
SELECT MANUAL MODE
Screen Pushbutton
Set the machine for Manual operation.
SIMULATE TEST START
Screen Pushbutton
Starts the Trickle Slide Station Simulation
Test.
SIMULATE TEST STOP
Screen Pushbutton
Stops the Trickle Slide Station Simulation
Test.
FIND HOME
Screen Pushbutton
Places the Trickle Slide Station in its Home
Position.
FAULT RESET
Screen Pushbutton
Clears the Trickle Slide Station Servo Drive
faults.
Note : Faults numbers are displayed on the
Servo Drive Front panel. Reference the servo
drive manual for descriptions and solutions
of faults.