background image

What is Radio Controlled Clock 

With the Radio-Controlled Clock, you have the most accurate timepiece within the 

continent. It can receive the time signal transmitted by the National Institute of Standards 

and Technology ( NIST ), which is regulated by 3 atomic clocks and deviate less than 1 

second within 3,000 years.

The NIST broadcasts the time signal ( WWVB, 60kHz ) continuously from Fort Collins, 

Colorado. This signal can be received anywhere in the continental USA that long wave (AM) 

radio reception is possible with a portable radio. It is expected that the signal can reach a 

distance of 2,000 miles from the transmitter. Therefore, your clock will receive the signal 

within the broadcast range anywhere an AM signal can be received; generally the signal 

cannot be picked up in massive metal and concrete structures unless near a window. In 

addition, some environmental effect ( see below ) may affect the transmitting distance.

For more information, please study the WWVB WEB page of NIST at :

http://www.boulder.nist.gov/timefreq/

Environmental Reception Effects

The Radio-Controlled Clock obtains the accurate time with wireless technology.  Same as 

all wireless devices, the receiving ability may be affected by, but not limited to, the following 

conditions:

•  Long transmitting distance.

•  Nearby mountains and valleys.

•  Among tall buildings.

•  Near railway, high voltage cable, etc.

•  Near freeway, airport, etc.

•  Near construction site.

•  Inside concrete buildings.

•  Near electrical appliances.

•  Bad weather.

•  Inside moving vehicles.

•  Nearby metallic structures.

P.2

Содержание 790E90712









Отзывы: