Wall Mounting or Using the Stand
The main unit has a built in stand, you can flip open to support the main unit on a flat surface.
You can close the flip and mount the unit on a wall. Drive a screw into the wall until the head
extends about 1/8 inch from the wall, then locate the keyhole slot over the screw head and
slide the Atomic Clock down to make it secure.
The remote unit comes with a wall mount holder which can hold the unit on wall, or just place it
on a flat surface.
Interference
Signals from other household devices, such as entry controls, door bells and home security
systems, may temporarily interfere with the units and cause reception failure. This is normal
and does not affect the general performance of the product. The transmission and reception of
temperature reading will resume once the interference has stopped.
Trouble Shooting
• Press the RESET button when the clock is displaying irrelevant time even when the tower
icon shows. This may happen when the external noise is severe enough to interfere with the
time signal.
• Press the RESET button on the transmitter if the readout is irrelevant or does not respond.
Care of Your Clock
• Avoid exposing your clock to extreme temperatures, water or severe shock.
• Avoid contact with any corrosive materials such as perfume, alcohol or cleaning agents.
• Do not subject the clock to excessive force, shock, dust, temperature or humidity. Any of
these conditions may shorten the life of the clock.
• Do not tamper with any of the internal components of this clock. This will invalidate the
warranty and may cause damage.
REMOTE