EL750
51 |
P a g e
Angle.
Slot Length.
Tool Diameter
Maximum Cut
Depth
Sel. Plane. (X-Y, X-Z or Y-Z).
Above parameters are explained in below image.
When you have entered the above parameters then press {
} key for executing
function.
This opens a counting mode for showing the arrangement of the holes.
You can use [
] and [
] keys to move around the holes. You can edit the saved
parameter by entering in edit menu by pressing {
} key. Press {
} key to exit
this function.
NOTE: -
For All the functions Co-ord1 refers to the first axis coordinate and Co-ord2
refers to second axis coordinate in the selected plane. Axis 1 refers to first axis and
Axis 2 refers to second axis in selected plane.
