EL750
50 |
P a g e
8.1.9
Pocket: -
This function is similar to Frame function, only the middle portion of the Frame is also milled.
The following parameters are required for this function:
Start Co-ord. 1
Start Co-ord. 2
Angle.
Side 1 Length.
Side 2 Length.
Tool Diameter
Maximum Cut
Machined To
Depth
Sel. Plane. (X-Y, X-Z or Y-Z).
Above parameters are explained in below image.
When you have entered the above parameters then press {
} key for executing
function.
This opens counting mode for showing the arrangement of the holes.
You can use [
] and [
] keys to move around the holes. You can edit the saved
parameter by entering in edit menu by pressing {
} key. Press {
} key to exit
this function.
8.1.10 Slot
Slotting is a simple milling function similar to the Arc functions only in a straight line. The
following parameters are required for this function:
Start Co-ord. 1
Start Co-ord. 2
