Pag. 33
SIRIO 2000T
SIRIO 2000T
SIRIO 2000T
SIRIO 2000T
SIRIO 2000T
Electronic Broadcast Equipment
Menu #00: Default Message
This field shows the default message and the software release. It is the field that will be initially displayed
or to which pressing repeatedly you can get back, after the "escape" key.
If authorised by the 3rd level permission, going to the command mode and by pushing "enter", will change
the first row of this field with a custom 20 characters long message e.g. the following organisation name:
Menu #01: Direct & Reflected Power
This field shows the direct and reflected power actually delivered.
Going to the command mode, with the 2nd level password authorisation, will allow to set a new direct
RF output power. See menu #21.
Menu #02: Multiplex Signal Level (Output Modulation)
This field shows the present peak modulation in dB referred to 75kHz and as deviation in kHz. A pseudo-
analog moving bar will contemporary change according to the modulation, leaving a peak mark at its end
for 1 or 2 seconds. A vertical bar (|) on this line marks the 0dB position.
Command mode, with the 2nd level password authorization, permits to set the LF input channel
sensitivity. See menu #22.
Right key instead permits to access to limiter setup and threshold. See menu #32.
MPX 75.0kHz + 0.0dB
############# O|
NORTH-WEST RADIO
X25 SW rev. 1.0
Dir Power: 2002 W
Refl Power: 26 W
AEV BOLOGNA -ITALY
X25 SW rev.1.0
