background image

27

Foreword

The installation,

 

use and maintenance Manual

 

(hereinafter Manual) provides the user with information 

necessary for correct and safe use of the machine (hereinafter “machine”, “refrigerator” or “appliance”).

The following must not be considered a long and exacting list of warnings, but rather a set of instructions 

suitable for improving machine performance in every respect and, above all, preventing injury to persons 

and animals and damage to property due to improper operating procedures.

All persons involved in machine transport, installation, commissioning, use and maintenance, repair and disassembly 

must consult and carefully read this manual before carrying out the various operations, in order to avoid wrong and 

improper actions that could compromise the machine’s integrity or endanger persons. Make sure to periodically inform 

the appliance user regarding the safety regulations. It is also important to instruct and update personnel authorised to 

operate on the machine, regarding its use and maintenance.

The manual must be available to operators and carefully kept in the place where the machine is used, so that it is 

always at hand for consultation in case of doubts or whenever required.

If, after reading this manual, there are still doubts regarding machine use, do not hesitate to contact the Manufacturer or 

the authorised after-sales service centre, to receive prompt and precise assistance for better operation and maximum 

efficiency of the machine.

During all stages of machine use, always respect the current regulations on safety, work hygiene and environmental 

protection. It is the user’s responsibility to make sure the machine is started and operated only in optimum conditions 

of safety for persons, animals and property.

The manufacturer declines any liability for operations carried out on the appliance without respecting the 

instructions given in this manual.

No part of this manual may be reproduced.

EN

Содержание GP379













Отзывы: