Sliding rail
(without a hold)
Fig 11
Sliding rail bottom
(with a hold)
To install the assembly of the sliding rail.
4.
a. Assemble the sliding seat into the sliding
rail from the top of the sliding rail. The
release button should be pointing upward,
when installing the sliding seat(see Fig 11).
5.
INSTALLATION
Fig. 10
5.5
Install the bracket
Find a proper place to drill two holes
(5.5mm diameter) in the vertical direction
with 425±1mm distance (Fig 9).
1.
NOTE:
proper position for the bracket if necessary.
Put the wall plugs on the holes, then
remove the sliding rail holder covers from
sliding rail holders on the upper position,
then replace the sliding rail holder cover.
3.
Check if there is any buried pipes or
cables before drilling.
WARNING!
NOTE:
point the opening downward (see Fig. 10).
Sliding Seat
Sliding rail
Soap tray
Screw
Wall plug
Soap tray holder
Sliding seat
release button
Sliding rail
holder cover
Sliding rail holder
Bracket parts
425±1mm
Fig. 9
16 www.electrolux.com
