5.
INSTALLATION
c. Assemble the soap tay on the soap tray
holder.
d. Place the sliding rail between the holders
holder as Fig. 13 shown.
b. Assemble the soap tray holder from the
bottom of the sliding rail as Fig. 12 shown.
Point the open
gap upward
The larger hole should
be pointed outside
Fig. 13
Fig. 12
6.
OPERATION INSTRUCTION
Temperature controler
The temperature knob adjusts water
temperature by increase/decrease the
- Clockwise rotate, decrease water
- Anti-clockwise rotate, increase water
On/off button
Control the shower unit's electricity
and working start/stop, when push on,
stops.
NOTE:
When you press the On/off button
the showerhead. To avoid too hot or too
point directly to human body.
6.1
Product features
3
4
2
3
1
Temperature
4
2
Heating power selector
This section is used to select the
desired working power of the shower.
The shower have 4 different working
power: Cold “
”, I(ECO) “
”, II “
”
and III “
”. The higher the power, the
higher the outlet temperature.
1
Water temperature indicator
This indicator indicate the outlet water
temperature and error code. For the
error code please refer to helpful hints
and tips section (page 21).
17
ENGLISH
