Electrolux EWM1000 Скачать руководство пользователя

Страница: 12 / 50

SOI/DT 2002-07 eb

599 35 36-69

4.3 Description of options

•

Night cycle:

→

Eliminates all spin phases and adds

three

rinses in COTTON cycles and

one

rinse in SYNTHETICS

cycles.

→

Stops the appliance with water in the tub before the final rinse.

→

Switches off the buzzer (if featured and configured).

→

To drain the water, reset the programme and then select a drain or spin cycle.

•

Pre-wash:

→

Adds a pre-wash phase at the start of the cycle with 30°C water (or cold, if selected).

→

In COTTON and SYNTHETICS cycles, performs a short spin before beginning the washing phase.

→

This option cannot be selected for WOOL and HAND WASH cycles.

•

Stains:

→

Adds a 5-minute motor movement phase after 40°C water heating phase.

→

Ducts water to the pre-wash/stains compartment in order to introduce the special stain remover.

→

This option cannot be selected for DELICATES, WOOL and HAND WASH cycles.

•

Short (daily):

→

Modifies the structure of the wash phase in COTTON and SYNTHETICS programmes in order to obtain

good washing performance with a very short cycle (optimized for small loads).

•

Very short:

→

Modifies the structure of COTTON, SYNTHETICS and DELICATES programmes in order to obtain very

short washing times (optimized for small or slightly dirty loads).

→

Reduces the number of rinses (one less).

→

Increases the water level in the remaining two rinses.

•

Economy / Energy label:

→

Modifies the structure of COTTON 40-60 and SYNTHETICS 50/60 programmes in order to reduce

energy consumption.

→

Reduces the washing temperature.

→

Increases the duration of the wash phase.

•

Extra rinse:

→

Adds

two

rinses in COTTON, SYNTHETICS and DELICATES cycles.

→

In COTTON cycles, performs only two intermediate 450 rpm-spin cycles. (CSR)

•

Bleach:

→

Ducts water through the bleach compartment at the beginning of the first rinse in COTTON cycles.

•

Half load:

→

Eliminates one rinse in COTTON programmes.

•

Easy-iron:

→

In COTTON programmes:

adds

three

rinses

eliminates the intermediate spin cycles

performs one impulse spin phase

extends to 5 minutes the “untangling” phase after the spin cycle.

→

In SYNTHETICS programmes:

reduces the heating temperature in 50/60° cycles to 40°C

increases the washing time

extends the cooling phase at the end of the washing phase

adds

one

rinse

extends to 5 minutes the “untangling” phase after the spin cycle.

Содержание EWM1000



















































Результаты поиска

Содержание EWM1000

Отзывы:

Похожие инструкции для EWM1000

Бренды по названию

Популярные бренды

Electrolux EWM1000, Руководство по обслуживанию

Результаты поиска

Содержание EWM1000

Отзывы:

Похожие инструкции для EWM1000

Бренды по названию

Популярные бренды