ELECTRO FREEZE Soft Serve Models SLX400E, SLX500
184584
25
Figure 9-2 Assemble beater shaft
assembly
Figure 9-1 Lubricate shaft seal
Figure 9-3 Lubricate bearing areas of
breaker bar
9 Assembly
Correct assembly of the freezer is
essential to prevent leakage of the
product and damage to the freezer. To
assemble the freezer you will need an
approved lubricant, such as Petrol Gel.
Make sure all parts of the assemblies
have been washed and sanitized before
assembling. Follow these directions for
each cylinder of the freezer.
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure the control pad
is “OFF” and that the power
switch is “OFF”.
1. Persons assembling the freezer must
first wash and sanitize their hands and
forearms with an approved sanitizer.
2. To assemble the shaft seal, install the
cup seals on the plastic washer as
shown in figure 9-1.
3. Apply a moderate amount of approved
sanitary lubricant (such as Petrol Gel)
to the beater shaft as shown in figure
9-2. Install the shaft seal over the
rear of the beater shaft, (figure 9-2).
Do not allow any lubricant to come in
contact with the bell-shaped rubber
portions of the shaft seal.
4. Apply lubricant to the bearing areas of
the breaker bar (figure 9-3).
5. Place the scraper blades on the
beater shaft, making sure the blades
are installed properly.
6. Slide the breaker bar into the center
of the beater shaft, making sure the
bar fits into the hole in the rear beater
shaft disc (figure 9-2).
7. Insert the assembled beater shaft into
the cylinder by placing the rear blade
on the bottom of the cylinder. This
will center the beater shaft and allow
alignment with the drive coupling.
Rotate the beater assembly while
pushing, until the shank has engaged
the coupling. Install both beater
shafts.
— continued
CUP SEAL
DO NOT
LUBRICATE
SEAL
LUBRICATE
WASHER
DO NOT
LUBRICATE
SEAL
WASHER
BAR -BREAKER
SHAFT - ASSY
BEATER
BLADE - SCRAPER
SEAL - BEATER SHAFT
LUBRICATE
HERE
BLADE - SCRAPER
WASHER - DOUBLE
SHAFT SEAL
LUBRICATE
HERE
LUBRICATE
LUBRICATE
Содержание SLX400E
