32
184584
ELECTRO FREEZE Soft Serve Models SLX400, SLX400E, SLX500
1. In areas where state and local
health codes allow, the freezer may be
switched to night operation, which will
allow the freezer to cycle all night and
maintain 40
º
F (4
º
C). or lower product in the
cylinder and hopper.
2. To switch the freezer to the night
mode, press the
“NIGHT” button.
3. Remove nozzles, and clean the drip
tray assembly and all soiled surfaces with
soap and water. Use sanitizing solution in a
spray bottle and brush to clean the bottom
of the plunger openings.
4. Turn the mix feed regulator to the
“
CLOSED
” position.
5. Check mix level in hopper to ensure
that there is enough mix to keep the
indicator light off, add mix if necessary.
Do
not dispense product when the mix feed
regulator is in the “CLOSED” position.
6. To start the machine after using the
“NIGHT” mode, press
freeze button
and replace the sanitized nozzles.
7. “
OPEN
” the mix feed regulator and
fill the hopper with mix.
11.1
Night Switch Operation
11
Closing Procedures
Figure 11-1
Mix Feed Tube
Positions
O
