ELECTRO FREEZE COMPACT Series Скачать руководство пользователя | Manualshive

Страница: 46 / 82

background image

ELECTRO FREEZE Shake Model CS705

184592

36

12 Routine Maintenance

— continued

MONTHLY

A. Test Head Switch.

The head switch feature is designed to prevent
the beater shaft from being accidentally
activated. It is essential that the proper opera-
tion of this switch be verified on a routine
basis. Use the following instructions to test for
proper operation:

1. Be sure all switches are in the “OFF”

position.

2. Disconnect the main power supply.

3. Remove the dispense head and

beater shaft assembly.

4. Connect the main power supply.

5. Turn the selector switch to the

“CLEAN” position.

CAUTION

Moving parts. Do not place hands
in the freezing cylinder. Severe
personal injury could result.

6. Look inside the freezing cylinder

toward the rear. The drive shaft coupling
should

NOT

be turning. Turn the selector

switch to “OFF” and disconnect the main
power supply.

7. If the drive shaft coupling is turning,

or you are unable to determine whether or not
the shaft is turning, turn the switch to the
“OFF” position, disconnect the main power
supply, and contact your Electro Freeze
distributor for service.

DO NOT

place the

freezer in service until the problem has been
fixed.

C.

Air Condenser.

Call your Electro Freeze Distributor for service to clean air condenser
fins.

MONTHLY

B. Test Flex Cover Switch.

The flex cover switch feature is designed to
prevent the spinner shaft from being accidentally
activated. It is essential that the proper operation
of this switch be verified on a routine basis. Use
the following instructions to test for proper opera-
tion:

1. Be sure all switches are in the “OFF”

position.

2. Disconnect the main power supply.

3. Remove the flex shaft cover.

4. Connect the main power supply.

5. Turn the selector switch to the “CLEAN”

position.

CAUTION

DO NOT touch or get too close to moving
parts. Clothing, jewelry, hair or other body
parts may become caught in the machine
and result in personal injury.

6. Place a container under the dispensing

plunger.

7. Push the rinse switch button. The spin-

ner shaft should

NOT

be turning. Water will be

dispensed. Turn the selector switch to “OFF” and
disconnect the main power supply.

8. If the spinner shaft is turning, or you are

unable to determine whether or not the shaft is
turning, turn the selector switch to the “OFF”
position, disconnect the main power supply, and
contact your Electro Freeze distributor for service.

DO NOT

place the freezer in service until the

problem has been fixed.

«
...
44
45
46
47
48
...
»

Содержание COMPACT Series



















































































Отзывы:

Нет отзывов

Похожие инструкции для COMPACT Series

Бренд: Halsey Taylor Страницы: 6

Бренд: Metos Страницы: 29

Бренд: JUNO Страницы: 10

Бренд: Baumatic Страницы: 28

Бренд: Indesit Страницы: 15

Kool-It KGC Series

Бренд: MVP Страницы: 14

TBB-24GAL-60G-S

Бренд: True Страницы: 2

Бренд: John Lewis Страницы: 12

Бренд: EdgeStar Страницы: 24

Бренд: Beko Страницы: 48

Бренд: AEG Страницы: 28

Бренд: Omega Страницы: 20

Бренд: Elkay Страницы: 3

Бренд: Danby Страницы: 17

Premiere DUFM085A3WP

Бренд: Danby Страницы: 24

Бренд: Danby Страницы: 28

Бренд: Thermador Страницы: 42

Бренд: Jagg Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды