ELECTRO FREEZE Soft Serve Model 99T-RMT
184621
37
CAUTION
Make sure the freezer is
depressurized before
proceeding.
a. Remove cover, loosen
swing clamp and open shoe to gain
access to the hose cavity.
b. Remove mix transfer hose
assembly.
c. Lay a towel on the cabinet
base below the MTS.
d. Using the spray bottle
supplied, flush the hose cavity and
roller assembly.
e. Use a brush (supplied) to
clean in between rollers. Flush with
sanitizer.
f. Wipe all surfaces with a
clean dry cloth.
g. Remove and clean roller
shoe. See figure 11-1.
Figure 11-1
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are in
the “OFF” position and that
the main power supply is
disconnected. Some freezers
have more than one
disconnect switch.
1. Clean the Mix Transfer System:
Important:
If the transfer hose is assembled im-
properly or replacement has been
neglected, it may be necessary to clean
mix from the MTS due to hose failure.
If this happens frequently the MTS
should be removed for complete clean-
ing.
AS NEEDED
11 Routine Maintenance
(continued)
