Electrex X3M, Руководство пользователя

Страница: 73 / 152

Pag. 73 di 152
9.4 Register Mapping
9.4.1 Holding registers
Registers from address 0 to 7 are compatible with the registers of the old instrument, in order to assure the backwards compatibility. The one described are the ones
of the KILO (T).
Registers from address 70 to 79 specific for X3M.
Registers from address 8 to 69 and from 132 to 139 are reserved for future expansions.
Holding Registers
Addr. Type Description Range [Unit] or Bitmap
Notes
0 Integer Word CT Ratio 1-9999 [A/A]
1 Integer Word VT Ratio 1-9999 [V/V]
2 Integer Word AVG Integration Time 1-60 [min]
3 NOT USED
Return undefined valued, if read.
Written values will be ignored.
4 NOT USED
Return undefined valued, if read.
Written values will be ignored.
5 NOT USED
Return undefined valued, if read.
Written values will be ignored.
6 NOT USED
Return undefined valued, if read.
Written values will be ignored.
7 Integer Word
Digital Outputs
Watchdog
0-65535 [min] 0 = Watchdog disabled
8
:
69
RESERVED
Return undefined valued, if read.
Don’t write in this area.
70
Bitmapped
Word
Words/Bytes swap
flags
Swap bytes
: 0 ≡ Standard; 1 ≡ Swapped
Swap words
: 0 ≡ Standard; 1 ≡ Swapped
Swap doublewords
: 0 ≡ Standard; 1 ≡ Swapped
Swap words in float values
: 0 ≡ Standard; 1 ≡ Swapped
Not Allocated
(Must be set to 0)
Standard means Motorola like and
Swapped means Intel like.
The same bit combination must be written in
both low and high part of register.
In this manner the "byte swap" setting is
meaningless for this register.
71 Integer Word Tx delay time 0-100 [s/100]