3.5.1.2 Description LED display
The optical LED display is divide into three areas, which are modeled after the traffic light system.
The LED lights change their color and the illuminated area with increased cartridge exhaustion.
The first area is divided into 4 gree LED lights. The LEDs turn on
consecutively until all 4 LEDs are active. This signals an increasing
cartridge exhaustion. The water quality is within the recommeded
range of VDI 2035.
The second area is divided into 3 yellow LEDs. All LEDs turn on
together and the green LEDs turn off. This signals that the cartridge
is soon to be exhausted and that a replacement of the cartridge will
soon be necessary. The quality of the treated water is still within the
range of VDI 2035.
The third area is divided into 3 red LEDs. All LEDs start flashing
accompanied by an acoustic signal. The yellow LEDs turn of. The
filter cartridge is exhausted and need to be replaced. The quality of the
water does not comply with VDI 2035 anymore.
3.5.1.3 Standby-Mode
The conductivity measurement is deacitivated as long as the device
is in the standby-mode. The LED display is not active.
There will neither be an acoustical nor an optical signal in case of
cartridge exhaustion when the device is operated in the standy-
mode.
Page 10
www.elector-water-treatment.com
CLARIMAX 1200 DM pH+ LED – Water-filter-system for treatment of heating-system make-up water