ELCOS SRL
- Parma - CIM-137/4G - 137/4GW - MAN - EN
3
SWITCHING OFF OF PUMP PROTECTION DEVICES
STOP DUE TO INSUFFICIENT PRESSURE
OR
PUMP WATER OVERPRESSURE
STOPPING DUE TO LOW
COOLANT LEVEL.
ENGINE OVERSPEED
AND UNDERSPEED
FAULT
OVERPRESS.
LOW PRESS
ALARM DUE TO
STARTING
FAILURE.
STOPPING DUE
TO HIGH ENGINE
TEMPERATURE.
STOPPING DUE TO
INSUFFICIENT
ENGINE OIL
PRESSURE.
STOPPING DUE TO
LACK OF BATTERY
CHARGING (BELT
BREAKAGE).
ENGINE WARMING
IN PROGRESS.
DECELERATION IN
PROGRESS.
ACCELERATION IN
PROGRESS.
CLUTCH ENGAGED
ENGINE COOLING IN
PROGRESS
ALARM OR STOP DUE TO:
• FUEL RESERVE
• NO FUEL.
PUSH-BUTTON PANEL LOCK see page 18.
UNDERSPEED
FAULT A1 - A2
OCCURRED
CONTENTS
Brief instructions and contents
page
2-3
Working pressure control-Pump protection-Failure to fill pipes.
“
4
Operation: Functions selection-Glow plugs preheating-Starting with call-Starting with
start button-Starting-Starting failure-Detection of running engine-Automatic pump
priming-Pump priming failure.
“
5
Operation: Clutch-Engine warming-Engine cooling-Stop-Emergency stop-Stop with the
Stop and Off-Reset buttons-Stopping failure-Buzzer.
“
6
Operation: Timer-Resetting of the set time-Oil and battery warning lights-End of work-
Instruments-CAN Bus messages and instruments-Anomaly messages-CAN Bus instru
-
ments- Cumulative alarms
“
7
Engine and pump protection devices
“
8-9
Wiring diagram
“
10-11
Automatic pump priming connection
“
12
GSM telephone warning device and command
“
13
Notifies via SMS message when the motor pump is in alarm condition
“
14
Possibility of displaying the status of the motor pump
“
15
Fuel fault
“
16
Notices
“
17
User programming
“
18
Dimensions - Technical data
“
19
Ordering data - Accessories supplied -
“
20
Button
switches off the pump protection devices:
• failure to prime main pump
• failure to fill pipes
• insufficient pump water pressure
• pump water overpressure
• abnormal acceleration
• adjustment error
- switching off is obtained by holding it down for at least 3 consecutive seconds; the function is indicated by the two intermittent
Indicators.
- this switching off is deleted by pressing the button again.