ELCOS SRL
- Parma - CIM-137/4G - 137/4GW - MAN - EN
15
Possibility to restore all the intervened protection devices and the general alarm.
To restore all the protections
of the engine of the pump, key in
RESET on the mobile phone
To set the minutes
(minimum 1’ max 1440’)
of work of the motor
pump key in on the
mobile phone:
500# .....
Minutes of work
example=
500#120
(2 hours of work)
Wrong examples
500 space = 120
spaces 500 # 120
500 or 120
500 # 1441
HOW TO VIEW THE STATUS OF THE MOTOR PUMP
SETTING OF THE MINUTES OF WORK
(TIMER)
SETTING OF THE WORKING PRESSURE
POSSIBILITY OF SWITCHING OFF THE PUMP PROTECTION
To request an
update on the
status of the
motor pump,
enter the
code 001 into
your cell phone
and send it by
SMS to the unit.
To switch off the
pump protection,
key in
010
on the
mobile phone.
To delete this
switching off,
key in
011
on the
mobile phone.
On your cell phone,
it is possible to view:
- hour-meter
- oil pressure gauge
- water or oil thermometer
- tachometer
- pump water pressure gauge
- fuel level
- battery voltmeter
- timer
(displays the working time remaining
before the motor pump is set to stop)
- pump protection exclusion
After the switch
off command,
the following
is displayed:
After the command
to delete switching off,
the following
is displayed:
After the command
the following is
displayed.
After the command
the following is
displayed.
BAR STORED
Reply message from
control unit to
mobile phone:
Reply message from
control unit to
mobile phone:
Reply message from
control unit to
mobile phone:
PUMP
PROTECTION EXCLUDED
if the setting is correct.
ERROR,
timer setting not
correct.
“ERROR
pressure setting
not correct.”
If the setting is not correct.
INTERMITTENT
SIGNALS
SIGNALS
OFF
OK, timer set to ...h...min
“OK, pressure set to 6.1 Bar”
if the setting is correct
PUMP
PROTECTION EXCLUDED
ACTIVE PUMP
PROTECTION
WATER PRESSURE 6,8 Bar
}
PRESSURE SWITCH 4,5 Bar Example
TIMER
10:15
0000
Working time
(MINUTES)
HOURS OF
OPERATION
reset
command carried out
RESET
Reply message from
control unit to mobile phone
The working pressure can be set through an SMS command.
The engine must be running. To set the working pressure write
on the mobile, for example:
600#6.1
The control unit will automatically set the pressure of the
motor pump to 6.1 Bar. The lowest settable value is 1 Bar
while the highest value is 21 Bar. The control unit accepts
these types of SMS:
600#6,1
600#6
600#6,11
Other types of SMS will not be accepted.