ELCOS SRL
- Parma - CIM-137/4G - 137/4GW - MAN - EN
1
CONTROL UNITS FOR IRRIGATION MOTOR PUMPS
AND PUMP WATER PRESSURE CONTROL
TYPE • CIM-137/4G (
EUROPEAN NETWORK COVERAGE
• CIM-137/4GW (
WORLDWIDE NETWORK COVERAGE)
COMPLETE OF 2G/3G/4G TELEPHONE
WARNING DEVICE AND COMMAND
• Notifies via SMS message when the motor pump is in
alarm condition.
• Programming pages of telephone numbers to be dialled
when the motor pump is in alarm condition.
• Possibility of displaying the status of the motor pump.
• Possibility of switching off the protection of the pump.
• Setting of the minutes of work.
• Setting of the working pressure.
• Possibility of starting or stopping with SMS commands.
• Possibility to restore all the intervened protection
devices and the general alarm.
• Operates the engine accelerator to keep the
pressure of the system constant.
(accelerator with 2 wires connected to the control unit)
• Controls the flow of water in the pipe.
• Electronic pressure switch to control the pump
water pressure.
• Digital pump water pressure gauge.
• Clock for programming the starting and stopping
of the motor pump.
• Delayed acceleration after starting.
• Delayed deceleration before stopping.
• Assembly also on the machine and in the open air.
• CANBus SAE J1939 connection.
• Frost protection.
• Pressure boost function
.
MADE TO:
PROTECT
motor pump sets by stopping them in the
event of:
- low oil pressure
- over-temperature
- belt breakage
- low coolant level
- low pump water pressure
- pump water overpressure
- overspeed
- A1
}
available
- A2
DISPLAY
on the panel the functions of:
- hour-meter
- oil pressure gauge
- water or oil thermometer
- tachometer
- pump water pressure gauge
- timer
- fuel level gauge
- battery voltmeter
- pump protection exclusion
- battery and oil lights
- protections intervention
- emergency stop
INSTR
UCTION AND USER MANU
AL