ELCOM Euro-2000TE Alpha Скачать руководство пользователя

Страница: 67 / 104

Euro-2000TE Alpha

Registration mode

B. PC ON-LINE mode: The data is transmitted from ECR to PC.

The cash register software allows use of the Euro-2000TE Alpha ON-LINE information source for PC. This

allows transmission of the sales data to PC for processing. It allows the preparation of the Invoice or

delivery note by the PC according to information from the ECR.

PC ON-LINE mode setting:

If the ECR is in R or T mode, press the key

Afterwards the cash register is ready to communicate

with a PC (PC ON-LINE mode). The cash register transmits information on PLU sale, PLU refund, purchase

finishing signal and the information on type and amount of payment. The text PC is displayed on the left

side of the display.
Please wait a moment for cash register response in case of switching to another key mode (L, X, Z, P) where

the PC-ON LINE mode is automatically switched off. Returning to mode R or T, the PC ON-LINE mode
is automatically switched on again. The PC-ON LINE mode is switched off by pressing the key

in R

or T mode. The switching off is confirmed by a beep. The text PC is not displayed.

The keyboard is out of function in PC-ON LINE mode except key

, by which you can leave PC ON-LINE

mode whenever. The text PC is not displayed.

Note 1:

Switching the ECR off and on prepares the ECR for standard registration.

Note 2:

PLU report amounts (in the concrete PLU No. 2400) are not correct in PC ON-LINE mode.

Note 3

: The data transmission direction for PC ON-LINE mode is set by the 5th system flag - digit 5=0).

Note

: The data transmission direction for the PC ON-LINE mode is set by the 5th system flag - digit 5=1).

Display:

DATA TRANSFER TO PC

Data are transferred from cash register to PC

TRANSFER FINISHED

Successfuly finished sales data transfer to PC

4.6.6 Credit Card Payment via EFT Terminal

The Euro-2000TE cash register can be used as the source of ON-LINE sale information connected to the PC

or EFT terminal. This function enables transmission of the sale data to the PC or to the EFT terminal

immediately after each purchase is completed.
The Euro-2000TE cash register has implemented communication of the Bull EFT terminal. The EFT terminal

is connected to the cash register via PC connector, which is also used for communication with PC. The cash

1 (5. system flag, 5. digit = 1)

Credit Card payment via EFT Terminal

In R or T mode after pressing a

key, the cash register checks if the EFT terminal is connected to its

PC connector. If the EFT terminal is connected, the display shows the current communication status and

the ECR waits for the reply form the terminal.

Содержание Euro-2000TE Alpha









































































































Результаты поиска

Содержание Euro-2000TE Alpha

Отзывы:

Похожие инструкции для Euro-2000TE Alpha

Бренды по названию

Популярные бренды

ELCOM Euro-2000TE Alpha, Руководство пользователя

Результаты поиска

Содержание Euro-2000TE Alpha

Отзывы:

Похожие инструкции для Euro-2000TE Alpha

Бренды по названию

Популярные бренды