ELCOM Euro-2000TE Alpha, Руководство пользователя

Страница: 34 / 104

Program manual Euro-2000TE Alpha © Elcom Ltd.
34
3.5.2 Tax name programming
After finishing the tax rate programming the rate of the tax appears in the first line of the display and the
name of tax in the second line (VAT 6%, VAT 23%, TAX 6% etc.). The name of the tax level can contain up
to 10 characters of standard size.
Enter the hexadecimal character codes that can be found in the alphabetic and hexadecimal character table
and press
V
button. After pressing the button, continue by programming the next tax levels.
Check programmed values by printing them. Press the
Q
(CHECK) button in the tax programming mode.
The programming of taxes will be finished by pressing the
W
(TOTAL) button.
1.tax level NAME
VAT 6%
Display:
The name of the first tax level programming.
3.5.1 Tax rate programming
Turn the mode key to the “P” position. Press the
I
(REFUND) button. The number of the programmed tax
level and its rate will appear on display. Enter the tax rate without a decimal point. The first two digits
determine the integer part of the tax rate in a percentage. The last two digits represent the decimal part of
the tax rate (for VAT 23% i. e. 2 3 0 0). Press the
V
button. The display is set to the tax name
programming (description of the tax).
Note: The tax rate can be changed only if “Z” daily and “Z” periodical report have been executed.
3.5 Programming TAX rates
The cash register allows the use of 6 TAX rates plus 1 rate without TAX. The TAX rate and its name is
programmable. The seventh rate is not programmable.
The TAX rate consists of two programmable features:
1. TAX rate (0%, 6%, 23%, ...)
2. TAX name (TAX, VAT, TAXABLE, ...)
Programming procedure:
1.tax level RATE
6.00%
Display:
first tax level programming