02/2016 - Art. Nr. 4200 1046 8202A
23
en
Complete the settings with a test phase
• Confirm the setting with symbol
. The burner enters into standby mode and starts a test
phase as soon as there is a heating request, or:
• Undo all the changes made with symbol
. The burner goes back to its previous state.
Test phase
If there is no heating request, the screen displays the image opposite.
During the following heating request, the burner starts with the new setting values.
After starting, the burner stays in the 1st stage and displays the image opposite from the
“commissioning” menu. To review the setting values, you can switch manually from 1st to 2nd
stage. Position the cursor on the corresponding line and confirm the switch using the
key.
Exit the menu:
• via the
symbol: repeat the setting phase from the start
• via the
symbol: confirm the settings; the burner is ready to operate
• via the
symbol: invalidate all the new settings; the burner goes back to its previous state
Commissioning
Menu 5: Configuration for domestic use
