elco Combi 24 Скачать руководство пользователя

Страница: 57 / 68

Maintenance

Maintenance details

Removal of panelling

The panelling must first be removed,

to be able to carry out maintenance

on the boiler. The panelling is secured

by a screw (a) behind the door. After

loosening the screw, the panelling can

be removed by shortly lifting (b) and

pulling it forward (c).

The panelling of the equipment consists

of metal and plastic parts, which can be

cleaned with a mild (non-aggressive)

cleaning agent.

Air box

- Please remove the transparent air

box, by opening the 6 red locking

clamps and removing the box

towards the front.

- The air box must be cleaned with a

humid cloth.

When carrying out maintenance works,

only original ELCO replacement parts

may be used.

CAUTION:

Always interrupt the power supply,

before carrying out maintenance or

repair works on the boiler.

Fan unit and burner cassette

- Close the gas stop valve.

- Remove the plug connectors from

the gas valve (1) and from the

ventilator motor (2).

- Open the screw connection (3) of

the gas valve.

- Exchange the seal in the gas valve

for a new one.

- Loosen the front Phillips screw

(4) at the left-hand side of the air

suction damper.

- Remove the siphon (7) and the

siphon insert (8), then empty and

clean these.

- Loosen the two clamping rods (11

and 12) with a 45° turn (below the

condensate collection tray), using

a hexagonal key, and pull these

forward and out.

- By lifting the internal waste gas

pipe (13) out of the condensate

collection tray (14), and by

simultaneously pressing together

the two bulges at the top of the

waste gas pipe, the collection tray

and the internal waste gas pipe can

be disassembled.

ÖFFNEN

OPEN

CLOSED

ÖFFNEN

Содержание Combi 24





































































Результаты поиска

Содержание Combi 24

Отзывы:

Похожие инструкции для Combi 24

Бренды по названию

Популярные бренды

elco Combi 24, Руководство по эксплуатации

Результаты поиска

Содержание Combi 24

Отзывы:

Похожие инструкции для Combi 24

Бренды по названию

Популярные бренды