Elba 9CX828, Инструкции по использованию - Советы по установке

Страница: 26 / 80

26 26
A
D
B
FEEDER CABLE SPECIFICATIONS
•
Type H05RR-F
•
or Type H05V2V2-F” (resistance
to temperatures of 90°C)
220-240 V ac 3 X 1,5 mm
2
(*) (**)
or Type SJT
220 V ac AWG 14/3 (*) (**)
(*) Connection possible with plug and
outlet
(**) Connection with wall box connection.
230 V
L1 N(L
2
) PE
Fig. 3.2c
Fig. 3.2a
Fig. 3.2b
220-240 V ac
Models without electrical hotplates
ELECTRICAL FEEDER CABLE CONNECTION
Important! This appliance must be connected to the electricity supply only by an
authorised person.
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorised service agent in order to avoid a hazard.
To connect the supply cable:
• Remove the screw securing the cover “ A ” on the rear of the cooker (fig. 3.2a).
• Unscrew cable clamp “ D ” (fig. 3.2b).
• Connect the wires to the terminal block “ B ” as shown in the diagram in figure 3.2c.
• Take up any slack in the cable and secure with the cable clamp “ D ”.
• Replace the cover “ A ”.
Note: The earth conductor must be left about 3 cm longer than the others.