Elation show designer 3, Руководство пользователя

Страница: 33 / 44

29
running. You can however run more than one show at a time when using the playback faders. The shows
that are running on the playbacks will not be shown in the display but you can run up to 16 shows at one
time using all the playback faders. Read the playback section later in this manual for details on how to run
shows this way.
A show that is called from the number switches is the “main show” and is displayed on the LCD as it runs.
There can only be one main show running at a time. Any shows that are running on the playbacks are side
shows and won’t be displayed on the LCD. The main show can be controlled using the “go”, “stop” and
“back” switches. Pressing “stop” will pause the main show if it is running on its clock. The stop LED will
be lit to indicate the show is paused. You can use “go” and “back” to manually step forward or backwards
in the show while it is paused. Press “stop” again to turn off the LED and restore the clock. If you
programmed the show as manual, you must use the “go” and “back” switches to step forwards or
backwards. If you press “go” while the clock is running the show will jump ahead to the next step.
If the show is set to loop, it will play continuously, restarting after the last step’s hold time has counted
down to 0 or when you press “go” (manual mode). If loop is set to “off”, the show will end after the last
scene has been called. If there is a link assigned to the show, the linked show will start as soon as the last
step’s hold time has elapsed or after the go switch is pressed in manual mode following the last step.