25
Use wheel #4 to adjust an offset if desired. “Offset” works similar to the shape chase offset in that each
fixture will be offset from the next by the number of steps you select. The order of offset across the
fixtures will be determined by the order that you select the fixtures for the chase.
Page two of the color chase edit menu contains the chase name field. Use the data wheels or an external
keyboard to name the chase. Save the chase the same as with the other chase types, first turn off the fixture
switch and then select a page and a number that is not occupied. After you have saved the chase, the
“record” and “chase” LEDs will continue to flash, allowing you to continue to edit the chase in case you
would like to save a slightly different version at another location. To exit record mode, press “record” and
the LEDs will stop flashing.
GOBO CHASE
The gobo chase is identical to the color chase except that gobo steps are used instead.
COLOR MIX CHASE
The color mix chase uses the cyan, magenta and yellow channels of a fixture to create a rainbow effect as it
fades through the various CMY combinations. It will also work with RGB channels. It will only work with
fixtures that have CMY or RGB channels defined. These channels will be defined by the fixture library or
by the fixture profile when the fixture is selected.
The “fixture” LED will be lit when you first start to edit a color mix chase. Select the fixtures to be
included in the chase. Use wheel #1 to adjust the step time. Use wheel #2 to adjust the offset between
fixtures. “Offset” works similar to the shape chase offset in that each fixture will be offset from the next by
the number of steps you select. The order of offset across the fixtures will be determined by the order that
you select the fixtures for the chase. Run the chase while you are adjusting these settings to see the result.
Use the data wheels #3 and #4 or an external keyboard to name the chase. Save the chase the same as with
the other chase types, first turn off the fixture switch and then select a page and a number that is not
occupied. After you have saved the chase, the “record” and “chase” LEDs will continue to flash, allowing
you to continue to edit the settings for the chase in case you would like to save a slightly different version
at another location. To exit record mode, press “record” and the LEDs will stop flashing.
EDITING CHASES THAT ARE ALREADY SAVED
To edit a chase that has already been recorded, press “record” followed by “chase”. Choose “Edit Existing
Chase” instead of a chase type (last selection in the list) and press “enter”. The number switches will be lit
for all existing chases. Select one of these and the chase will be called up and you can add to it or modify it
using one of the record chase menus. After you have finished editing the chase you can store it at the same
memory location or at a new location by selecting a page and by pressing a number switch. You can also
use this method to copy a chase to another location by saving it without making any changes.
ERASE CHASE
To erase an existing chase from the memory, press “record” then “chase” then “erase”. As when recording
a chase, all LEDs that contain a chase will be lit. Next select the chase to erase. The message “Erase this
Chase?” along with the chase name will appear in the LCD. Press “yes” or “no”. If you press “yes” the
chase will be erased. You can abort chase erase at any time by either pressing “no” or exiting record mode
by pressing the “record” switch.
Содержание show designer 3
Страница 1: ...Software Revision 1 12...
