Elation show designer 3 Скачать руководство пользователя страница 30

Страница: 30 / 44

RECALLING CHASES

To run a chase, press the “chase” switch, and then press the desired page and number switch. The chase

will begin to run at the speed that was selected when it was recorded. Pressing the same switch again will

turn the chase off. You can run more than one chase (up to 16) as long as they are chasing different

channels. If a new chase is selected that completely overrides one that is running, the overridden chase will

be automatically turned off. A chase is canceled when another one is called that controls all of the same

channels. A chase will not be canceled if only some of its channels are overridden. The channels that are

still available will continue to chase.

Whenever you press the “chase” switch, the names of any chases that are running will be displayed along

with the speed and fade time of the chase. You can use data wheel #1 to cycle through the chases if there

is more than one running. You can use data wheel #3 to adjust the step time and data wheel #4 to adjust

the fade rate of the running chase that is currently shown in the display. Any speed changes that are made

will be saved if you record the current scene. This allows you to reuse the same chase in different scenes at

different speeds.

RECALLING CHASES WITH PLAYBACK MASTERS

You can assign a chase to a playback master then use the playback fader or its switch to call the chase. The

playbacks offer several different playback modes. Read the section on playback masters for more detailed
information on how they work.

Содержание show designer 3













































Результаты поиска

Содержание show designer 3

Отзывы:

Похожие инструкции для show designer 3

Бренды по названию

Популярные бренды

Elation show designer 3, Руководство пользователя

Результаты поиска

Содержание show designer 3

Отзывы:

Похожие инструкции для show designer 3

Бренды по названию

Популярные бренды