Elation Power Spot 700, Руководство пользователя

Страница: 30 / 56

Power Spot 700™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
30
control head movement, the color wheel, the shutter (strobe), and all other DMX
traits. A DMX controller allows you to create unique programs tailored to your
individual needs. The Power Spot 700™ uses 16 DMX channels. See page 27 for
detailed description of the DMX traits.To control your fixture in DMX mode, follow the
set-up procedures on pages 13-15 as well as the set-up specifications that are
included with your DMX controller. Use the controller’s faders to control the various
DMX fixture traits.This will allow you to create your own programs.
4.1.1 Follow the instruction on page 18 to set the DMX address.
4.2.2 For longer cable runs (more than a 100 feet) be sure to use a terminator on the
last fixture.
4.2.3 For help operating in DMX mode consult the manual included with your DMX
controller.
4.2 Stand-Alone Operation (Sound Active): This mode allows a single fixture to run to
the beat of the music. Only use this mode when running a single fixture, or when
running several fixtures as individuals.
4.2.1 Mount your fixture in a secure and stable manner.
4.2.2 Access the main menu and select the AUDI function, this will give you access to
the audio submenu. See page 16 for the menu breakdown.
4.2.3 In the audio submenu choose the audio chase speed, fast or slow. Slow (ASLW)
will trigger the chase sequence to every two beats, while fast (AFST) will trigger
the chase impulse every beat. See page 16 for more details.
4.2.4 Be sure the Master (MSTR) function is switched “ON,“ and the SVPT function is
switched “OFF.“
4.2.5 Choose your room size. The size function allows you to choose a the
approximate size of the room (NORM, BIG, MIDL, SMAL). The built-in programs
will automatically adjust to your slection to optimize light output for your room.
4.2.6 Use the sound sensitivity knob on the side control panel to make the unit more or
less sensative to sound. Turning the knob in clockwise direction will make the
unit more sensetive to sound, while turning the knob counter-clockwise will make
the unit less sensetive to sound. Note: This unit will react to the low frequiencies
of a sound source, tapping on the fixture or high pitched sound may not trigger
the fixture.
4.3 Master-Slave Operation (Sound Active): This function will allow you to link up to 16