Elation Power Spot 700 Скачать руководство пользователя страница 47

Страница: 47 / 56

Power Spot 700™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page

Maintenance and Cleaning the POWER SPOT 700™

It is absolutely essential that the fixture is kept clean and dust, dirt and smoke-fluid

residues do not built-up on the surface or within the fixture. Otherwise the fixture's light

output could be significantly reduced. Regular cleaning will not only ensure the maximum

light output, but will also allow the fixture to function reliable throughout its life.

A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,

under no circumstances should alcohol or solvents be used!

The inside optical system should be maintained only by qualified technicians. Please

contact Elation professionals for recommendation associated with internal cleaning

procedures.

9.1 Safety Regulations

•

Always disconnect main power before attempting any service related

issues!

•

Allow ample time for the lamp to cool (at least 20 minutes) before performing any

cleaning procedures.

•

Never attempt operation with any of the protective covers removed!

9.2 Cleaning Frequency (rule-of-thumb)

The contamination of the fixture depends on the environment details. Therefore no

general guidelines can be given. From this it follows that the intervals are only

suggestions from our practice experience.

Position

Interval

In this way

Outside optic

Weekly

Soft cloth and glass cleaner

Color filter

Monthly

Soft cloth and glass cleaner

Gobos

Yearly

Vacuum cleaner, airbrush, etc.

Glass gobos

Monthly

Soft cloth and glass cleaner

Prism

Monthly

Soft cloth and glass cleaner

Dimmer/Shutter

Yearly

Vacuum cleaner, airbrush, etc.

Inside lens

Monthly

Soft cloth no glass cleaner

Fan and air channel

Monthly

Vacuum cleaner, airbrush, etc.

Reflector

Never

Lamp

Never

Moveable parts

Yearly

Suitable Lubricant

Содержание Power Spot 700

























































Результаты поиска

Содержание Power Spot 700

Отзывы:

Похожие инструкции для Power Spot 700

Бренды по названию

Популярные бренды

Elation Power Spot 700, Руководство пользователя

Результаты поиска

Содержание Power Spot 700

Отзывы:

Похожие инструкции для Power Spot 700

Бренды по названию

Популярные бренды