Elation Power Spot 700, Руководство пользователя

Страница: 15 / 56

Power Spot 700™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
15
2.2 Secure the POWER SPOT 700™
Regardless of the rigging option you choose for your POWER SPOT 700™ always
be sure to secure your fixture with a safety cable. The fixture provides a built-in
rigging point for a safety cable on the underside of the fixture, be sure to use this
point and never secure a safety cable to a carrying handle.
2.3 Connections
2.3.1 Power supply
Electronic ballast with:
90~260 Volts, 50~60 Hz,
Grounded contact type plug – Neutrik Powercon
Connected load 780W
<=>
3.8A (blind current compensation).
NOTE: The universal power supply will accept any voltage source as detailed
above without any type of internal or user modifications.
2.3.2 DMX-512
3-Pin XLR Input/Output. [+] = Pin 3 / [-] = Pin 2 / [Ground] = Pin 1
DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used
by most lighting and controller manufactures as a form of communication
between intelligent fixtures and controllers. A DMX controller sends DMX data
instructions from the controller to the fixture. DMX data is sent out as serial
data that travels from fixture to fixture via the DATA “IN” and DATA “OUT”
XLR terminals located on all DMX fixtures (most controllers only have a DATA
“OUT” terminals). DMX Linking: DMX is a language allowing all makes and
models of different manufactures to be linked together and operate from a
single controller, as long as all fixtures and the controller are DMX compliant.
To ensure proper DMX data transmission, when using several DMX fixtures
try to use the shortest cable path possible. The order in which fixtures are
connected in a DMX line does not influence the DMX addressing. For
example; a fixture assigned a DMX address of 1 may be placed anywhere in a
DMX line, at the beginning, at the end, or anywhere in the middle. Therefore,
the first fixture controlled by the controller could be the last fixture in the chain.
When a fixture is assigned a DMX address of 1, the DMX controller knows to