Power Spot 700™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
28
Pan reverse
RPAN
ON
OFF
9
Tilt reverse
RTLT
ON
OFF
9
Automatic lamp on
LAAU
ON
OFF
9
Lamp on via DMX
DLOF
ON
9
OFF
Display
DISP
D ON
9
REV
Cooling fan
FANS
HIG
H
REG
9
LOO
F
LOHI
Feedback
FEED
ON
9
OFF
3.9.10 Feedback ”APC”
FEED
The POWER SPOT 700™ is equipped with
”APC,”
automatic position
correction. This function automatically corrects the Pan and Tilt movement
should the unit lose step or is obstructed and forced to lose step. Press the
Enter
button to access the sub-menu. Use the
Up
and
Down
buttons to toggle
between “ON” and “OFF” and confirm once more with the
Enter
button or use
the
Mode
button to cancel the operation.
3.9.11 Error and Fault Corrections
EFLG
(These functions are reserved for authorized technicians only)
3.10 Display Error and Information Messages
HEAt
This message appears if you try to switch on the lamp within 5 minutes
after having switched off (lamp too hot). The message will appear on
the display if the lamp doesn’t ignite within 20 seconds. The fixture will
store this command and automatically ignite the lamp after 5 minutes.
IG E
When igniting the lamp, the electronic ballast will examine whether the
lamp ignited or not. If the lamp does not ignite within 20 seconds, the
igniting sequence is terminated. The fixture will wait approximately 2
Содержание Power Spot 700
Страница 2: ...Power Spot 700 Elation Professionals Los Angeles Ca wwww ElationLighting com Page 2...
Страница 51: ...Power Spot 700 Elation Professionals Los Angeles Ca wwww ElationLighting com Page 51 10 PHOTOMETRIC DATA...
Страница 52: ...Power Spot 700 Elation Professionals Los Angeles Ca wwww ElationLighting com Page 52 12 DIMENSIONS...