Elation Power Spot 700 Скачать руководство пользователя страница 5

Страница: 5 / 56

Power Spot 700™

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page

INTRODUCTION:

Congratulations, you have just purchased one of the most innovative

and reliable lighting fixtures on the market today! The Power Spot 700™, has been

designed to perform reliably for years when the guidelines in this booklet are followed.

Please read and understand the instructions in this manual carefully and thoroughly before

attempting to operate this unit. These instructions contain important information regarding

safety during use and maintenance.

UNPACKING:

Thank you for purchasing the Power Spot 700™ by Elation Professional®.

Every Power Spot 700™ has been thoroughly tested and has been shipped in perfect

operating condition. Carefully check the shipping carton for damage that may have

occurred during shipping. If the carton appears to be damaged, carefully inspect your unit

for damage and be sure all accessories necessary to operate the unit have arrived intact.

In the event damage has been found or parts are missing, please contact our customer

support team for further instructions. Please do not return this unit to your dealer without

first contacting customer support at the number listed below.

CUSTOMER SUPPORT:

Elation Professional® provides a customer support line, to

provide set up help and to answer any question should you encounter problems during

your set up or initial operation. You may also visit us on the web at

www.elationlighting.com for any comments or suggestions. For service related issue

please contact Elation Professional®. Service Hours are Monday through Friday 9:00 a.m.

to 5:00 p.m. Pacific Standard Time.

Voice: (866)

245-6726

Fax:

(323)

582-3108

E-mail:

[email protected]

Forum:

www.ElationLighting.com/forum/

Warning!

To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

rain or moisture.

Caution!

There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty.

Please do not discard the shipping carton in the trash. Please recycle whenever possible.

Содержание Power Spot 700

























































Результаты поиска

Содержание Power Spot 700

Отзывы:

Похожие инструкции для Power Spot 700

Бренды по названию

Популярные бренды

Elation Power Spot 700, Руководство пользователя

Результаты поиска

Содержание Power Spot 700

Отзывы:

Похожие инструкции для Power Spot 700

Бренды по названию

Популярные бренды