Elamed ALMAG-03, Руководство по эксплуатации

Страница: 3 / 28

DIAMAG
Operating Manual Page 3
SAFETY INSTRUCTIONS
Please read this Operating Manual carefully before starting the
treatment and routine procedures.
Carry out the procedures in places suitable for plugging the de-
vice into the power supply socket without straining the mains
cord or the emitters` cables; otherwise use power extenders of
industrial production. The DIAMAG device is to be connected only to a
properly functioning socket with an operating voltage of ~220-
230V/50Hz or ~120V/60Hz (see marking).
No lifting, carrying, or unplugging the device by pulling the mains cord
is allowed.
To avoid possible damage to the device, keep it away from the
reach of children.
Make sure to do visual examination of the device prior to start-
ing the treatment procedure. Using the device if its housing, emitters or
cables are damaged is
PROHIBITED!
Please store and use the control unit and emitters only in dry
places.
Avoid penetration of moisture inside the control unit and emit-
ters while treating their surfaces with disinfectant solution. Pro-
tect the device from dampness, shock and impact.
Keep the device away from direct sunlight and high tempera-
tures.
After storage or transportation of the device at low tempera-
tures, keep it at room temperature for at least four hours prior to
usage start.
Do not twist or bend the cables; store the device in the con-
sumer container after its usage.
Do not place an operational device nearby (less than 0.5 m
apart from) magnetic data carriers (floppy disks, credit cards,
video records, mobile memory units).