9
APPLICATION AREA
The A 75F/R dehumidifier is designed for drying laundry in communal drying rooms, e.g. in rented accommodation.
The dehumidifier can also be used for other types of drying and climate control in other premises. The dehumidifier is
intended for use in heated rooms. + 15–35ºC.
TECHNICAL DATA
Dimensions H x W x L:
680 x 470 x 490 mm
Weight:
46
kg
Electrical connection:
1N~230V
Fuse:
10A,
slow
Rated
power:
2030W
Auxiliary heating:
1000W
Working range, temp:
+15–35°C
Working range, RH:
30-99%
Air flow, free circulation:
800 m
3
/h
Refrigerant, type:
R134a
GWP effect R134a:
1300
Refrigerant, quantity:
350 g
Noise level (1 m in front):
67dB (A)
IP
rating: X4
RoHs
EU Declaration of Conformity see www.elbjorn.com
EN
INSTALLATION
POSITIONING
Position the dehumidifier horizontally on a wall console or floor frame.
Wall console and floor frame can be ordered as accessories. As an alternative, the
device can be placed on a floor console or another flat, stable surface close to a wall.
Adjust the feet so that the dehumidifier is horizontal.
When the dehumidifier has been supplied together with the pipe system, it is
important that the height is correct with regard to the base pipe of the pipe system.
(Refer to installation instructions for pipe system.)
WATER DRAINAGE
The drying room dehumidifier is fitted with an outlet for water drainage.
Fit a permanent condensation drain with a 15 mm compression joint or alternately
a ½" hose.
The drain pipe should be routed with a drop towards the floor drain. If the drain
pipe is very long, increase the size of pipe one step.
The drainage hole is located on the left side of the dehumidifier.
ELECTRICAL CONNECTION
Connect the drying room dehumidifier’s plug
to a 1 N-230V+PE socket.
Fuse with at least a 10A slow fuse.
WARNING!
Electrical connection of the wall outlet or additional
equipment for the drying room dehumidifier must be
performed by a qualified electrician according to national
installation regulations.
