10
EN
Timer, mechanical wind-up (accessory)
A mechanical timer can be fitted as an accessory to the drying room dehumidifier.
Fit the timer in a suitable place (e.g. inside the door) in the drying room, and
connect as follows:
• Use a cable with 1.5 mm
2
min. area.
• Connect the timer between the electrical supply and the dehumidifier.
A main switch should be installed in front of the timer.
Electronic timer with preset time (accessory)
An electronic timer can be fitted as an accessory to the drying room dehumidifier.
Fit the timer in a suitable place (e.g. inside the door) in the drying room, and
connect the power as follows:
• Use a cable with 1.5 mm
2
min. area.
• Connect the timer between the electrical supply and the dehumidifier.
Note that this timer requires an N connection (N). A main switch should
be installed in front of the timer.
External fans (accessory)
One or more external fans can be fitted to the ceiling to increase air circulation.
If other circulation fans are present in the drying room, they must not blow directly
towards the dehumidifier’s inlet or outlet. These fans should be controlled by the
timer.
OPERATION
HANDLING DURING NORMAL OPERATION
Start
Electronic timer with preset time
Press the start button and the drying room humidifier will run for the preset time
(factory setting 2.5 h).
If the start button is pressed again during operation, the operating time will start
again from zero.
The drying room dehumidifier can be stopped with the stop button.
B
C
