- 8 -
STEP 2
Once you have successfully pulled the bottom bracket outside the
chassis, mount the radiator and carefully tighten the screws without
completely fixing it in place. This step is crucial if you want to install
hard tubing without difficulties.
STEP 2
OPTIONAL: INSTALLING THE BOTTOM RADIATOR IN THE FRACTAL TORRENT CHASSIS
STEP 1
For this step, you need:
Important:
These steps are to be followed if you are
using the EK-Quantum Surface P240 radiator and hard
tubing. 360mm or longer radiators cannot be used in the
bottom of the chassis when EK-Quantum Reflection2
Torrent DDC 4.2 PWM D-RGB distribution plate is
installed. Also note that EK-Loop Vertical GPU holder is
NOT compatible with the bottom radiator in this case.
STEP 1
Position the Quantum Surface fittings and end tank plugs as seen
in the image so that you can use tubing parallel to the longest side
of the radiator.
EK-Loop Multi Allen Key