![background image](http://html.mh-extra.com/html/ekoterm/gp-20-18-sc/gp-20-18-sc_installation-operation-and-maintenance-manual_2374282028.webp)
Pellet burner GP xx sc 28
Figure 6.11. Option “Operation with heat accumulator (buffer)”.
6.3.
ADJUSTMENT OF THE BURNER’S HEATING OUTPUT.
The burner’s heating output adjustment can be performed through adjustment of its heating
output level. Information about the burner’s heating output within all different levels is
presented in Table 6.1.
In case the used fuel type has been changed (for example change in the wood
pellets quality category) it might be necessary to re-adjust the burner’s heating
output level.
6.3.1. DECREASING THE BURNER’S HEATING OUTPUT.
It can be performed through decrease of the burner’s heating output level, as the heating
output assignment decreases and respectively the fuel consumption decreases too.
6.3.2. INCREASING THE BURNER’S HEATING OUTPUT.
It can be performed through increase of the burner’s heating output level, as the heating
output assignment increases and respectively the fuel consumption increases too.
When changing the heating output, respectively the fuel consumption, the
controller’s algorithm automatically changes the firing air flow rate supplied by the
fan, which feature ensures optimal operation modes within wide heating output
range.
EXT 1
EXT 2
EXT 3
EXT 4
EXT 5
EXT 6
Heat Accumulator
or Buffer
Sensor B
Sensor С
Sensor A
Water in boiler
Dual sensor
Connectors