EKOM DK50 D, Руководство по обслуживанию

Страница: 10 / 29

SERVICE MANUAL
- 10 - SM-eVENT-GB-3_8-2006.doc

pointer of indicator will move from the green zone and the air from compressor will not reach the
declarable parameters (see technical data).
The hour meter (5) indicates total running time of the air pump.
6.3. Cleaning and replacement of air intake filter
There is air intake filter (12) at the front side. It is necessary to clean/change air intake filter each
200 hours, in view of dustiness in the ambient used place with more frequently. It is necessary the
filter to take out of the box by its holding and pulling out, wash when filter is little infected, very
infected change by new. Insert the clean filter until the sucking hole for filter is not perfectly
covered by filter.
6.4. Cooling failure alarm
A problem with the air pump cooling signalize the red indicator (3) and the acoustic alarm.
In the event of cooling failure alarm is necessary ensure alternate air pressure
source and disconnect the compressor.
6.5. Cleaning the compressor
The product can be cleaned by the usual detergents. Please do not clean the product using a
solution containing abrasive components, chemical solvents or another aggressive chemical.
7. SERVICE
Repairs that exceed the framework of common maintenance must be performed
only by a qualified expert or the Customer Service Dept. of the manufacturer. Use
only spare parts and accessories approved by the manufacturer.
Prior to any maintenance or repairs, it is necessary to switch off the compressor
and disconnect it from mains (pull out mains plug).
Before every service intervention it is required to remove the front and back covers
unscrewing screws 2x3 pcs on the side of the cabinet, disconnect the ground connector
on the covers. Connect ground connection on the covers, and secure the covers using
all screws on the side of cabinet.
7.1. Intervals of service
Time interval (hrs)
Operation of service Chapter
2000 4000 6000 8000 10 000 12 000
•
Check of safety valve 7.4 1 x per annum
•
Verification of tightness of
joints and check inspection of
appliance
7.10 2000 hours running or after 2 year
•
Replacement of service kit F
(filters)
7.5 - 7.7 x x x x x
•
Replacement of service kit A 7.13 x x
•
Replacement of service kit B 7.8 - 7.9 x
•
Replacement of service kit C
x
PDF created with pdfFactory trial version www.pdffactory.com