FUEL BED LAYOUT
(Log effect option) continued
2. Open the bag of 9 moulded ceramic logs. All of
the logs except two are the same. Take the largest
log (numbered 16) and place it as shown. Care
should be taken to ensure that the orientation is
correct and the log fits snugly into its position.
3. Take the two medium sized logs (numbered 15
and 8) position the log numbered 8 on the left
hand side ensuring correct orientation. Place the
log numbered 15 on the right hand side again
ensuring correct orientation. Both these logs will fit
securely into their allocated poisition, they may
require rotating slightly to ensure this.
4. Now take the remaining large log (numbered 4)
and position vertically as shown, ensuring correct
orientation. The base of this log must rest secure-
ly on the front log strip. Take one of the smaller
logs (numbered 14) and position in between the
two vertically positioned logs ennsuring the orien-
tation is correct. Keep the spacing between these
logs uniform.
5. Finally, take the remaining two medium sized
logs (numbered 5 and 7) and place in a horizontal
position shown, 5 first, resting on the front log
strip. 7 next resting on 5. Now take the smallest
log (numbered 12) and position in the orientation
shown ensuring the log does not fall into the
matrix but rests securely on the allocated sup-
ports. Now take the final log (numbered 14) and
place in a horizontal position as shown. Ensure
there is even spacing between the logs and rotate
if necessary to provide a stable fit onto the matrix.
The fuel bed layout is now complete.
The fire is designed to operate correctly with
the logs supplied when assembled according to
the instructions. Never add to the nine logs, or
change them for a different type. Never throw
rubbish or other matter onto the fuel bed.
OPERATING INSTRUCTIONS
(manual control models)
The pilot is visible through the left hand side of the front ceram-
ic strip. Push in and turn the control knob to the SPARK position,
and hold there for a few seconds.
Continue turning anti-clockwise through the spark click to the
PILOT light position, ensuring the pilot has lit. If not, return the
knob clockwise, and repeat.
5.2
6.0
5
16
15
8
4
14
5
14
12
©
2009 Focal Point Fires plc.
