27
Chapter7Reference
Chapter 7 Reference
7-1. How to Attach the Arm
Another manufacturer’s arm (or another manufacturer’s stand) can be attached by removing the stand section of the
monitor.
Attention
• When attaching an arm or stand, follow the instructions of their User’s Manual.
• When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA
standard.
-
Clearance between the screw holes: 100mm × 100mm
-
Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.
• Use the screws as described below.
-
Screws fixing the stand to the monitor
• When attaching an arm or stand, do not use the screw holes for mounting the stand.
• When using an arm or stand, attach it to meet the following tilt angles of the monitor.
-
Up 45˚, down 45˚
• Connect the cables after attaching an arm or stand.
• Do not move the removed stand up and down. Doing so may result in injury or device damage.
• The monitor and arm or stand are heavy. Dropping them may result in injury or equipment damage.
Procedure
1.
Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.
2.
Remove the stand.
Prepare a screwdriver. Loosen the screws (four) securing the unit and the stand with the screwdriver.
3.
Attach the arm or stand to the monitor.
Mount the arm or stand using the supplied screws.
