Eizo DURAVISION FDH3601, Руководство пользователя

Страница: 26 / 47

26
Chapter6Reference
●
To set input signal selection
Setting Function
Auto ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
Manual ThemonitordetectsonlythePC’ssignalscurrentlydisplayingautomatically.Choosean
inputsignalcombinationyouwanttodisplaywith
.
Procedure
1. Choose “Tools” from the Adjustment menu, and press .
2. Choose “Input Selection” from “Tools”, and press .
3. Select “Auto” or “Manual” with or .
4. Press
to exit.
Note
• When “Auto” is selected for “Input Selection”, the monitor’s power saving function works only when all PCs are in the
power saving mode.
●
To set input signal combination
You can limit the input signal combinations to choose with . Select “On” for the signal combinations
you want to display. After this, the input signal combination switches to the specified ones only.
Procedure
1. Choose “Tools” from the Adjustment menu, and press .
2. Choose “Input Preset” from “Tools”, and press .
3. Choose an input signal combination with or , and press .
4. Select “On” or “Off” with or .
5. Press
to exit.
Attention
• You cannot set all the combinations disable. Set at least one input signal combination to “On”.