24
Chapter6Reference
6-2. How to Install the Wall Mounting Device
The monitor and AC adapter can be attached to a wall mounting device.
Attention
• Ask an installation contractor for the attachment.
• Prepare a wall mounting device separately.
• When installing a wall mounting device, follow the instructions of its User’s Manual.
• Use the screws as described below.
-Monitor: The screws supplied with this monitor (M6 × 16mm, 4 pcs.)
-AC adapter: Screws on the backside (3 pcs.)
• Attach the AC adapter in the correct orientation in accordance with the procedure.
• After the attachment of the AC adapter, be sure to tighten the screws on the backside.
• Connect the cables after attaching an arm or stand.
• Do not move the removed stand up and down. Doing so may result in injury or device damage.
• The monitor, AC adapter, and wall mounting device are heavy. Dropping them may result in injury or equipment damage.
Procedure
1.
Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.
2.
Remove the stand.
Prepare a screwdriver. Loosen the screws (four) securing the unit and the stand with the screwdriver.
3.
Install the wall mounting device and attach the monitor to it.
Mount the arm or stand using the supplied screws.
4.
Attach the AC adapter to the wall mounting device.
Remove the three screws from the backside of the AC adapter.
Screws(3)
Attach the AC adapter as shown below using the screws removed. Do not attach the AC adapter in the wrong
orientation.
Wall
Wall
Top
Top
Bottom
Bottom
