En
gli
sh
13
Chapter 1 Introduction
Rear
2
3
4
1
6
5
7
8
9
10
1. Camera connection terminal
Connects the camera to the CCU with the provided cable.
2. HDMI output terminal (FHD)
*1
Connects a monitor equipped with HDMI input. Full HD images and audio
are output.
* 3
3. SDI output terminal (FHD)
*1
Connects a monitor equipped with SDI input. Full HD images and audio
are output.
* 3, *4
4. HDMI output terminal (4K
UHD)
*1
Connects a monitor equipped with HDMI input. 4K UHD images and
audio are output.
* 3
5. SDI output terminal (4K UHD)
*2
Connects a monitor equipped with SDI input. 4K UHD images and audio
are output.
* 3, *5
6. RS-232C terminal
Connects a computer to the CCU with a RS-232C cable (D-Sub 9 pin).
7. MODE switch
DIP switches used for switching the settings are located.
No.
ON/OFF
Description
1
ON
Set the switch to OFF.
OFF
2
ON
Set the switch to OFF.
OFF
3
ON
Set the switch to OFF.
OFF
4
ON
PAL(50 Hz) mode
OFF
NTSC(60 Hz) mode
* If the settings are changed, be sure to cycle the power supply.
The power is turned off for all the components in the factory
default state.
8. Ethernet connection terminal
Connects a LAN cable here.
* 6
9. Audio output terminal
Connects an audio device. Analog audio is output.
10. DC IN terminal
Connects the DC OUT terminal of the AC adapter.
*1
Image and audio signals are simultaneously output from respective HDMI and SDI terminals (4 types
total) for Full HD and 4K UHD images.
*2 Audio is output from Channel 1.
*3 Audio output is disabled in the default settings. Use “Audio” on the menu screen and enable audio output
from each port.
*4
3G/HD-SDI supported.
*5 Quad Link 3G-SDI supported.
*6 100BASE-TX supported. Use cables in CAT 5 or higher.
Содержание CuratOR SC430-PTR
Страница 59: ...English 59...
