Eizo CuratOR SC430-PTR, Инструкция по эксплуатации

Страница: 25 / 60

En
gli
sh
25
Chapter 2 Setup
3.
Select “Installation Direction” and push the joystick toward right or left, and
then select “CeilingSuspended”.
<<=== Camera & Lens ====
Zoom Speed <|---|---|>
Focus Speed <|---|---|>
PAN Speed <|---|---|>
TILT Speed <|---|---|>
ROLL Speed <|---|---|>
Installation Direction CeilingSuspended
ROLL Angle Sync On
Zoom Position Sync On
The test pattern is displayed, and the settings are re ected.
4.
Press the “MENU” button to exit the settings.
●
Adjusting the Brightness
When using this product for the rst time, the brightness adjustments are necessary.
Use an actual image and check if the brightness is appropriate. If not, adjust it accordingly.
Con gure the following settings tailored to your operating environment.
Changing the ALC Level
If it is too bright or too dark, change the ALC level.
1.
Press the “MENU” button.
The MENU screen appears on the monitor.
2.
Select “ALC”, and press the “ENTER” button or push the joystick toward right.
ALC =>
Picture =>
Color =>
Camera & Lens =>
Video Output =>
Audio =>
Device Setting =>
Save/Load =>
Information =>
Language English
3.
Select “Level” and push the joystick toward right or left.
<<=== ALC ====
ALC Mode Full Auto
Level 0dB
Shutter Speed 1/60
Iris F6.3
Gain 9dB
Iris Limit(H) F3.2
Iris Limit(L) F11
Gain Limit 12dB
Center Weighted Metering Off
Pushing the joystick toward right makes the screen brighter. Pushing it toward left makes the screen
darker.
4.
Press the “MENU” button to exit the settings.
See “4-1. ALC” (page 29) for details on ne adjustments of the “ALC” menu.