Eizo COLOREDGE CG2730, Руководство пользователя

Страница: 9 / 58

9
Chapter 1 Introduction
●
Rear
12
8
7 6 5 4
11
9
10
4. Main power switch Turns the main power on or off.
: On : Off
5. Power connector Connects the power cord.
6. Input signal connectors Left: DVI-D connector
Center: HDMI connector
Right: DisplayPort connector
7. USB upstream port
Connects to the USB cable when using software that requires a USB
connection, or when using the USB Hub function (
page 43 ).
8. USB downstream port Connects to a peripheral USB device.
The port supports quick recharging ( page 30 ).
9. Handle This handle is used for transportation.
Attention
• Firmly grasp and hold the monitor by the bottom while grabbing the
handle, and carefully convey the monitor so as not to drop it. Do not
hold the sensor section on the front side of the monitor.
10. Security lock slot Complies with Kensington’s MicroSaver security system.
11. Stand
*2
Adjusts the height and angle (tilt and swivel) of the monitor.
Attention
• When adjusting the height or angle, do not hold the sensor section on
the front side of the monitor.
12. Cable holder
*3
Covers the monitor cables.
*2 An optional arm (or an optional stand) can be attached by removing the stand section (see “6-1. Attaching
the Optional Arm” (page 39) ).
*3 For details on mounting the cable holder, see “6-2. Attaching/Detaching the Cable Holder” (page 41) .