40
Chapter 6 Reference
Attaching the Optional Arm (or Optional Stand)
1.
To prevent damaging the panel surface, lay the monitor with its panel surface
facing down on a soft cloth spread on a stable surface.
2.
Remove the stand.
As shown below, keep the lock button pressed down (
1
) and slide the stand towards the stand base
until it touches (
2
). Then, lift the stand up (
3
).
(3)
(2)
(1)
(1)
3.
Attach the arm or stand to the monitor.
Use the VESA mounting screws supplied with this product when attaching the arm or stand.
Attaching the original stand
1.
Remove the fixing screws on the optional arm (or optional stand), and detach
the optional arm (or optional stand).
2.
To prevent damaging the panel surface, lay the monitor with its panel surface
facing down on a soft cloth spread on a stable surface.
3.
Attach the original stand.
As shown below, insert the four tabs on the stand into the square holes on the back panel (
1
) and
slide the stand towards the upper portion of the monitor until it makes a clicking sound (
2
).
(1)
(2)
(2)
Click!
