Eizo COLOREDGE CG2730, Руководство пользователя

Страница: 6 / 58

6
Chapter 1 Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• 27″ widescreen
• Wide color gamut display (Adobe
®
RGB coverage: 99 %)
• Achieves contrast ratio of 1500:1
*1
A high contrast ratio allows for display of crisper black.
*1 Standard value. When "DUE Priority" is set to "Brightness"
• Resolution: Supports 2560×1440
• IPS panel with 178˚ horizontal and vertical wide viewing angles
• The monitor display stabilizes within approximately 3 minutes after the monitor is turned on.
*2
*2 According to EIZO measurement conditions. However, if performing SelfCalibration ( page 24 ),
it is necessary to wait at least 30 minutes after turning on the power, in order to obtain correct measurement
results.
• Frame synchronization mode supported (23.75 - 30.5 Hz, 47.5 - 61.0 Hz)
• Color mode function
Reproduces a color temperature, gamma, and gamut compliant with the following standards.
- Adobe
®
RGB / sRGB
See “Chapter 3 Advanced Adjustments/Settings” (page 17)
• This product is equipped with a built-in calibration sensor, and supports SelfCalibration in which the
monitor executes calibration independently.
See “SelfCalibration” (page 24)
• The provided Color Management Software "ColorNavigator 6" enables you to calibrate monitor
characteristics and generate color profiles
See “1-3. EIZO LCD Utility Disk” (page 10)
• Equipped with a USB Hub function that supports USB 3.0
Achieves high-speed data transfers of up to 5 Gbps, which enables transfers of large amounts of data to and
from USB memory devices in a short amount time.
Also, the
USB downstream port supports quick charging, so you can recharge your smartphone or
tablet in a short period of time.
See “6-4. Making Use of USB (Universal Serial Bus)” (page 43) and “USB CHARGE Port” (page 30)
• Displays HDCP (High Bandwidth Digital Protection) protected content.